1. Manuals
  2. Brands
  3. AVYCON Manuals
  4. Test Equipment
  5. AIVO-54T4K
  6. User manual

AVYCON AIVO-54T4K User Manual

Ip network tester
Hide thumbs
Table of Contents

Advertisement

Quick Links

AIVO-54T4K
USER MANUAL
IP NETWORK TESTER
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIVO-54T4K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AVYCON AIVO-54T4K

Summary of Contents for AVYCON AIVO-54T4K

  • Page 1 AIVO-54T4K USER MANUAL IP NETWORK TESTER...
  • Page 2 • Thank you for purchasing the IP camera tester. Please read the manual before using the IP camera tester and use properly. • For using the IP camera tester safely, please first read the [ Safety Information] carefully in the manual. •...

  • Page 3: Table Of Contents

    Table of Contents 1. Safety Information ..................3 2. IP Camera Tester Introduction ..............4 2.1 General ............................4 2.2 Packing List ..........................4 2.3 Function Interface ......................... 4 3. Operation ....................8 3.1 Installing the Battery ........................8 4. IP Camera Test ................... 9 4.1 Power Output ..........................

  • Page 4: Safety Information

    1. Safety Information • The tester is intended to use in compliance with the local rules of the electrical usage and avoid to apply at the places which are inapplicable for the use of electrics such as hospital, gas station etc. •...

  • Page 5: Ip Camera Tester Introduction

    2. IP Camera Tester Introduction 2.1 General The 5.4 inch IPS touch screen IP camera tester is designed for maintenance and installation of IP cameras, analog cameras, TVI, CVI, AHD cameras, as well as testing 4K H.264 /4K H.265 camera by mainstream. The 1920x1152 resolution enables it to display in high resolution image from cameras.

  • Page 6: Function Interface

    2. IP Camera Tester Introduction 2.3 Function Interface...
  • Page 7 2. IP Camera Tester Introduction...
  • Page 8 2. IP Camera Tester Introduction...

  • Page 9: Operation

    3. Operation 3.1 Installing the Battery The tester has built-in lithium ion rechargeable battery. The battery inside battery cabin should be disconnected for safety during transportation! Prior to the use of the instrument, please take out the battery insulation paper. Pressing the key continuously can power on or off the tester.

  • Page 10: Ip Camera Test

    4. IP Camera Test 4.1 Power Output Camera can be powered from the DC 12V/3A output or by Power over Ethernet. 4.2 IPC Test Pro Camera test often need to open multiple apps, “IPC TEST PRO” app, using new technology and combine multiple functions to one APP, it can increase efficiency.

  • Page 11: Ip Discovery

    4. IP Camera Test By one key to connect camera test tool, browser can login and configure camera. Batch activate Hikvision and Dahua cameras. 4.3 IP Discovery Press IP discovery , tester auto-scan the whole network segment IP, as well as auto-modify the tester’s IP to the same network segment with the scanned camera’s IP.
  • Page 12 4. IP Camera Test Click the button “Refresh”, tester will scan the ONVIF camera again. Click the newly displayed ONVIF camera on the “Device List”. The tester will show the IP camera’s relative information and settings. Pop-up settings menu when click the “setting” icon in the upper left corner. Across network segments scan: After open this function, Rapid ONVIF function can across network segments to scan camera’s IP.
  • Page 13 4. IP Camera Test Confirm: Save the modified parameters. Click “MENU” icon to open camera setting. While in the “Live video” menu, click “Video Menu” at the top right of the image to access the following tools: Snapshot, Record, Photo, Playback, Lens simulation, PTZ and Settings. Network setting: Click “Network Set”...
  • Page 14 4. IP Camera Test OSD Menu: Select OSD and popup the OSD menu. include time, channel name and other optional items. After selecting channel, you can edit the channel name, modify the display position, and switch the font size. If not modify, select “Content location - Default location”.
  • Page 15 4. IP Camera Test Video files can play in the Video player on the main menu. Set preset position: Move the camera to preset position, enter the preset number on the bottom right corner to complete position preset. Call the preset position: Select the preset number on the left, click “Call” to call preset. PTZ speed set: Horizontal and Vertical speed set.
  • Page 16 4. IP Camera Test Doc: Click “Create document”, can create the testing reports document of camera. Click “Preview” to view the report document Enter the camera test information, click “Create Document” to complete the report. Click doc menu again, you can preview the report document.

  • Page 17: Non-Onvif Ip Camera Test

    4. IP Camera Test 4.5 Non-Onvif IP Camera Test Display image from the 4K H.265 camera by mainstream. Note: Currently, the IPC Test App only supports some brands’ specific IP cameras, these include specific models made by ACTI, AXIS, Dahua, Hikvision, Samsung, and many more. If the camera is not fully integrated, please use the ONVIF or RTSP apps.

  • Page 18: Analog Camera Test

    5. Analog Camera Test 5.1 CVBS Analog camera test and PTZ control. Check and set the protocols, address, interface and baud, all must be consistent with the dome camera, then the IPC tester can test. After setting the parameter, the tester can control the PTZ and lens.

  • Page 19: Cvi Camera Test

    5. Analog Camera Test 5.3 CVI Camera Test When HD CVI signal input, the tester will display the image resolution at the top of the screen. Double-taps on the screen to make the image displayed full screen. The tester supports resolution up to 3840 x 2160P 12.5/15 FPS.
  • Page 20 5. Analog Camera Test 1.2 RS485 Control (2) Coaxial Camera Menu Setting Input calling dome camera menu address code, you can press the key “Enter” or click the icon to call the dome camera menu. Set the parameters by...

  • Page 21: Tvi Camera Test

    5. Analog Camera Test 5.4 TVI Camera Test When HD TVI signal input, the tester will display the image resolution at the top of the screen. Double-taps on the screen to make the image displayed full screen. The tester supports resolution up to 3840 x 2160P 12.5/15 FPS.

  • Page 22: Ahd Camera Test

    5. Analog Camera Test 5.5 AHD Camera Test When AHD signal input, the tester will display the image resolution at the top of the screen. Double-taps on the screen to make the image displayed full screen. The tester supports resolution up to 3840 x 2160P 15 FPS. (1) Coaxial PTZ control UTC control: Select “PTZ or PTZ-2”...

  • Page 23: Xvr Display

    6. XVR Display 6.1 HDMI IN When tester receives HDMI input image, the top tool bar shows the resolution of this image. You can select “res- olution” to set resolution in the setting menu. Tap screen by twice, full image display. Support resolution up to 4K 30FPS, 3840x2160P 30FPS, 720×480p /720×576p /1280×720p /1920×1080p /1024×768p/1280×1024p /1280×900p /1440×900p (1) Snapshot...
  • Page 24 6. XVR Display (2) Video Record When you click the “Record” icon, video starts recording. A red recording icon appears on the screen and begins to flash and a timer appears indicating the time elapsed for the video. Click on the “Record” icon again to stop recording and save the video file to the SD card.

  • Page 25: Vga In

    6. XVR Display (4) Recorded Video Playback Click the “Playback” icon to view your recorded videos. Tap on the video file image you want to watch. To rename or delete a video, click and hold on the file until this screen appears: Video files also can play in the main menu “Video Player”.

  • Page 26: Other Function

    7. Other Function 7.1 Network Tool (1) IP Address Scan Connect the cable to the LAN port, click icon to enter, set your IP address search range by changing the Start and End IP addresses. Click the “Start” button to scan the IP address range. You can also input an IP address in the Port Number Scan to scan for open ports.
  • Page 27 7. Other Function (5) DHCP Server Click on the DHCP icon to open the DHCP server app. Select the “Start” check box at the top and make any desired changes to the network settings. Click “Save” to start assigning dynamic IP addresses for IP cameras and other networked devices.

  • Page 28: Rj45 Cable Tdr Test

    7. Other Function 7.2 RJ45 Cable TDR Test Connect cable to tester’s LAN port, click icon “ ” to enter app. Single test: Test cable status, length and attenuation. Repeat test: Continue to test cable status, length and attenuation. Status: After link up, screen display “online”, if not link up or open circuit, screen display “open circuit”, if cable pair is short circuit, screen display “short circuit”.

  • Page 29: Cable Tester

    7. Other Function 7.3 Cable Tester Click icon to enter. Test LAN cable or telephone cable. Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires as well as the serial number of the cable tester kit will be displayed. The number of the cable tester is 255.

  • Page 30: Poe Power / Dc12V 3A Power Output

    7. Other Function 7.4 PoE / DC12V 3A Power Output When the tester is turned on, the DC12V power output functions are automatically turned on. To use the PoE Power Output function, change the switch “ON” or “OFF”. The IP camera needs to connect the LAN port before you turn on PoE Power. If the IP camera supports PoE, the PoE power is delivered via pins 1, 2, 3, and 6 on the LAN port.

  • Page 31: Update

    7. Other Function 7.5 Update Copy the downloaded update file to SD card “update” directory, if no this directory, please create one. Click the icon to open the Update menu. Select “Local Update” to update via the SD card or select “Online Update”...

  • Page 32: File Explorer

    7. Other Function 7.6 File Explorer Click “File” on the top bar tool, can select internal or external storage. Click on the upper right corner Icon “...”. will pop-up menu, you can select other operation or exit. Browse It includes Music, Videos, Pictures, Documents, zip file etc. It is convenient to view and manager. FTP Server You can choose internal or external SD card.

  • Page 33: System Setting

    7. Other Function 7.7 System Setting Language: Select your desired language: English, Portuguese, Korean, Russian, Italian, French, Polish, Spanish, Japanese, Turkish, Deutsch, Serbain, Czech, Vietnamese etc Typewriting: You can select typewriting or install other typewriting: Date/Time: Set the Date/time of the IP tester. IP setting: Manually set the IP address, Subnet Mask, Default Gateway and DNS address or select “Dynamic allocation”...
  • Page 34 7. Other Function Wi-Fi hotspot: Input “SSID” name and “password”, and then click “ok” to create Wi-Fi hotspot. Brightness: Set the desired brightness of the IP tester and adjust the sleep time settings. Volume: Set volume level SD Card: Displays SD Card Capacity. You can also format the SD card or umount it before removing it. FTP server: Once the IP tester connects to a network, a computer can be used to read the SD card files via FTP.
  • Page 35 7. Other Function Screen display rotation: Click on “Screen Rotation” to flip the IP tester’s display 180 degrees. This function is very convenient for the user to connect the LAN cable on the bottom of the unit without having to flip the unit itself.

  • Page 36: Specifications

    8. Specifications 8.1 General Specifications...
  • Page 37 8. Specifications...
  • Page 38 8. Specifications Note: The data above is only for reference and any changes of them will not be informed in advance. For more detailed technical inquiries, please feel free to call our technical department.
  • Page 39 Copyright @ AVYCON. All rights reserved. Specifications and pricing are subject to change without notice. phone: 949-752-7606 email: info@avycon.com social: @avycon_aivo website: avycon.com...

Table of Contents