Wolf WWD30 Use & Care Information Manual page 8

W O L F
E L E C T R O N I C
P R E S E T P R O G R A M M I N G
Preset temperatures and time settings can be
adjusted for the PROOF, LOW, MED and HIGH
PRESETS.
The PROOF temperature range is 80–110˚F
(25–40˚C). The LOW, MED and HIGH PRESETS
can be adjusted from 80–200˚F (25–95˚C).
To Adjust Preset Temperature and Time
Settings:
Warming drawer must be OFF.
Touch POWER ON/OFF.
Touch and hold the desired PRESET,
PROOF, LOW, MED or HIGH for 5 seconds.
The word TIMER will illuminate and "4:00"
will flash in the LCD display along with the
temperature. Adjustments to the settings
should be made within 30 seconds. The unit
will exit the preset programming mode if
no adjustment is made within this time.
To adjust the temperature, touch and hold
the TEMP UP arrow to increase or the
DOWN arrow to decrease the temperature
until the desired preset temperature is
shown in the LCD display.
To adjust the time setting, touch and hold
the TIMER UP arrow to increase or the
DOWN arrow to decrease the time until the
desired preset time setting is shown in the
LCD display.
Touch and hold the adjusted PRESET again
for 5 seconds. Three quick tones will signify
that settings for the PRESET have been
changed. If 30 seconds elapse before you
touch and hold the PRESET, the unit will
exit the preset programming mode with no
adjustments made.
8
WA R M I N G D R AW E R U S E & C A R E
C O N T R O L S S A B B AT H M O D E
Sabbath Mode is for certain religious obser-
vances where some of the warming drawer
functions need to be turned off. In Sabbath
Mode, the automatic shut-off feature is
disabled, allowing the warming drawer to
operate continuously.
To Initiate Sabbath Mode:
Warming drawer must be OFF.
Touch and hold POWER ON/OFF for 5
seconds. The word "Sab" will flash in the
LCD display after 5 seconds.
While "Sab" is flashing, select one of the
PRESETS or set the temperature with the
TEMP UP or DOWN arrow pads. Touch the
UP arrow to increase the temperature and
the DOWN arrow to decrease the tempera-
ture. Two tones will signify that the Sabbath
Mode has been initiated.
In Sabbath Mode, the warming drawer will
operate continuously until POWER
ON/OFF is touched. The word ON will
remain illuminated in the LCD display all
the while the unit is in Sabbath Mode. No
other read-outs will appear in the LCD
display.
Touch POWER ON/OFF to shut off the
warming drawer and exit Sabbath Mode.
When the Sabbath Mode is initiated,
the automatic shut-off is disabled,
requiring the unit to be turned off
manually by touching POWER ON/OFF.