Vetter PRESSURE GUARD 16 Manual page 10

Vetter | Emergency pneumatics | Safety cushion | PRESSURE GUARD
Safety instructions
Observe the following safety instructions to ensure that you use the pressure
monitor safely:
• The pressure monitor may only be installed and operated by authorized
and trained personnel.
• Carefully monitor the safety cushion and the pressure monitor during op-
eration and take them out of operation if problems occur or irregularities
are detected.
• Regularly check the pressure monitor and the speaker to ensure that they
are working properly.
• Ensure that the safety cushion is only used under the supervision of trained
personnel.
• Users should be made aware that the safety cushion is not a toy and that
improper use can lead to serious or even fatal injuries.
• Ensure that the safety cushion is regularly maintained so that it is in per-
fect condition and meets all the safety requirements.
• Only use accessories approved by Vetter GmbH.
Installation:
• The pressure monitor must be installed correctly. Follow the instructions in
this quick guide for this purpose.
• Installation is carried out outside the danger zone before the safety cush-
ion is positioned at the place of use. Do not work on the Pressure Guard
or refill the safety cushion in the danger zone
• Ensure that the hose connection is firmly and securely connected.
• The pressure monitor should be installed in such a way that it is clearly
visible and easily audible.
10 / 11 ENGLISH 9987094400 | Rev. 01-10/23