Table of Contents
Advertisement
16 OPERATION
OPERATION
Before Use
WARNING
• To reduce the risk of fire, electric shock, or injury
to persons, read the SAFETY INSTRUCTIONS
before operating this appliance.
Operation Overview
Before the first wash, select the Normal cycle and
add a half amount of the detergent. Start the
appliance without clothes. This will remove
possible residue and water from the drum that
may have been left during manufacturing.
1
Sort laundry and load the washer.
• Sort laundry by fabric type, soil level, color
and load size, as needed. Open the lid and
load items into the washer.
• If using single-use detergent packs, or gel
or tablet detergents, place them in the tub
before loading the laundry.
2
Add cleaning products.
• Add the proper amount of HE (High-
Efficiency) detergent to the detergent
dispenser.
• If desired, add bleach or fabric softener to
the appropriate dispensers.
• Do not place liquid or powdered detergent
packs, or gel or tablet detergents in the
dispenser.
3
Turn on the washer.
• Press the Power button to turn on the
washer.
• The lights above the cycle buttons will
illuminate and a chime will sound.
4
Select a cycle.
• Turn the cycle selector knob or press the
cycle buttons repeatedly until the desired
cycle is selected.
• The preset wash temperature, spin speed,
soil level and option settings for the
selected cycle are shown.
• The Normal cycle must be selected in order
to change its default settings.
• Pressing the Start/Pause button without
selecting a cycle immediately starts the
Normal cycle with the default settings.
5
Adjust settings.
• Default settings for the selected cycle can
be changed, if desired, using the cycle
modifier and option buttons.
• Not all modifiers and options are available
on all cycles. A different chime sounds and
the LED does not light up if the selection is
not allowed.
6
Begin cycle.
• Press the Start/Pause button to begin the
cycle. The lid locks, and the washer agitates
briefly without water to measure the weight
of the load.
• If the Start/Pause button is not pressed
within a certain time, the washer shuts off
and all settings are lost.
NOTE
• You must press and hold the Power button
when turning off the appliance. This helps
prevent accidentally turning it off during a cycle.
7
End of cycle.
• When the cycle is finished, a melody
sounds. Immediately remove the clothing
from the washer to reduce wrinkling.
• If the washer includes lint filters, remember
to check lint filters after every 2 to 3 loads.
Sorting Laundry
Grouping Similar Items
For the best washing results, and to reduce the
possibility of damage to clothing, sort clothing into
loads made up of similar items.
Mixing different fabric types and/or soil levels can
result in poor wash performance, color transfer,
discoloration, fabric damage or linting. Fabrics
should be sorted into groups as described below.
Advertisement
Table of Contents
