Advertisement
4,
IS
SONY.
SERVICE MANUAL
FOR
MICROPHONE
HEADSET SYSTEM DR-6020
Assembly
MICROPHONE ECM-9030, ECM-9031 (See Figure 4 through 6.)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Pass through the cords of the plug (A) ass'y and plug (B) ass'y to the bushing. (See Figure 5.)
Bundle the cords of the plug (A) ass'y and plug (B) ass'y by the clamp. (See Figure 5.)
Solder the lead wires of the plug (A) ass'y and plug (B) ass'y to the amp board mount.
Put the cords of the plug (A) ass'y and plug (B) ass'y in the amp casing (B).
Pass through the cord of the microphone main-frame ass'y to the case bushing. (See Figure 6.)
Bundle the cord of the microphone main-frame ass'y by the clamp. (See Figure 6.)
Solder the lead wire of the microphone main-frame ass' y to the amp board mount.
Put the cord of the microphone main-frame ass'y in the amp casing (B). (See Figure 6.)
Assemble the amp casing (A) to the amp casing (B) by screwing the screw.
MICROPHONE ECM-9035, ECM-9036 (See Figure 7 through 9.)
Original
Advertisement
