Philips VR455 Manual page 16

Select the "TIME ON"
First, press two NUMBER buttons for the hour.
Next, press two NUMBER buttons for the
minute.
Now, press NUMBER button "1" for AM or
"2" for PM.
For example, for 9:30 PM, press NUMBER buttons 0-9, 3-0, 2.
Check or Clear Timer Recordings
1. Turn the VCR on. VCR must be in VCR
mode.
2. First, press the MENU button.
Next, press the I button to select
"PROGRAM."
Now, press the 4 button to select
"PROGRAM REVIEW."
The Timer Record information for the
lowest numbered position (1 — 8)
Select the "TIME OFF"
First, press two NUMBER buttons for the hour.
Next, press two NUMBER buttons for the
minute.
For example, for 10:00 PM, press 1-0, 0-0, 2.
Select the Recording Speed
Press the I or 2 button to choose SP (Standard
Play) or SLP (Super Long Play). is PM
You cannot use the SPEED button on the SPe1 Sips2!*
remote control to choose the recording speed.
START DATE 07/01/95
SAT.
TO CANCEL PUSH CLEAR
NEXTa=l END> MEN
3. Press the 1 button repeatedly to view all
the filled positions.
If you do not press the 1 button, after 10
seconds the display changes to the next
filled position. This continues until all
filled positions appear. Finally, the
screen returms to the previous on-screen
menu.
4. Press the CLEAR button to clear a filled
position.
5. At any time, press the MENU button
once to exit the Program Review mode.
6. Repeat steps 1 —4 to make sure you
have cleared the correct filled positions.
To fill a position, follow "Timer
Recording" steps 1 — 12.
NOTE: This function does not work with
OTR (One Touch Recording).
TO CORRECT PUSH CLEAR
TO END PUSH MENU
Select the "START DATE"
First, press two NUMBER buttons for the month.
Next, press two NUMBER buttons for the day.
For example, to make a recording on July 1 ,
press 0-7, 0-1. ae RECSPEED SP
The year and day of the week will be displayed START DATE O7A195
automatically.
relat Colelmacelsieclin
Press the MENU button.
"PROGRAM WAS COMPLETED" should appear on the screen.
If "PROGRAM NOT COMPLETED" appears, please try again
from step 1 on page 15.
After 3 seconds, the display will disappear from the screen, and the
normal TV picture will reappear.
The TIMER indicator will light up on the VCR.
select the Next Program
If needed, press the MENU button and repeat steps 2 to10. rs) (o) OMe) tclaccle Mm Nii csm arsine) cetale
1. Press the POWER button.
¢ Timer recording is cancelled and VCR
Set the Timer power tums off.
; Today's recording stops. If it is a Daily or
ibe ail press the POWER button to OFF on the remote Weerly recoidine, funiie recordings will be
carried out as programmed.
After a Timer Recording Has Taken Place
Press the POWER button on the remote control to retum your VCR
(Video Cassette Recorder) to normal operation.
lf the Power Should Fail...
repeat the steps on pages 8 and 9 before setting up a Timer
Recording.