Philips VR455 Manual page 12

12 Record One Channel/See Anoihe
o record one channel while viewing another, follow steps 1 —4 below. Please read all the instructions. You
must use your remote control.
SIClemMacielseliile
Set the VCR/TV Button
Press the VCR/TV button to select the TV mode. The VCR
indicator disappears.
ANTENNA
(or
CABLE)
INPUT SELECT:
TUNER
VCR VCR Indicator
Select the Channel at the TV for Viewing
Select the channel to be viewed at the TV, using the channel
controls on the TV or TV remote control.
VCR/TV Button
The channel selected with the TV channel controls appears on the
TV screen. The channel selected with the VCR channel control is
recorded on the tape. ,
To Return to the Channel Being Recorded
First, using the channel controls on the TV or TV remote control,
return the TV to either channel 3 or 4 (Please see "Hook Up Your
VCR.")
VCR CH(annel)
Buttons
Now, press the VCR/TV button to view again the channel being
recorded.
VCR/TYV Button
Remote Control
* Tf you are not receiving channels, please repeat the
steps on page 7 — 8 of this book. Also, follow
carefully the instructions listed above.
Point the transmitter toward the remote sensor, within
the angle shown in the illustration above.
NOTE: If you use a converter box or satellite Congratulations! You've taken many steps. Now, turn to
. system hook-up, you may not be able to do the next page and find out a little more about your VCR
this feature. and remote control.