Setup; General - BMW M2 CS RACING 2020 Driver Manual

6.5.

SETUP.

6.5.1.

GENERAL.

Measurement Setup:
Car Dry Weight. [kg]
Dummy Driver Weight. [kg]
Setup Fuel (incl. CatchTank). [kg]
Setup Wheel Diameter, front/rear. [inch]
Tyre Pressure bar
BMW M2 CS RACING 2020 I DRIVER MANUAL I BMW M MOTORSPORT I V02 I AUGUST 2023
measured
80
45
18
2.0
Setup Procedure:
A basic measurement setup generally consists of
the following components:
▪
Setup Table.
▪
Corner Weight Scales.
▪
Setup Wheels.
▪
Turn Tables.
▪
Toe- / Camber Equipment.
1. Ensure the car is always in the same
conditions for setup and set down.
2. Bodywork is either fully mounted or
compensation weights are fitted.
3. Always the same people should bounce the
car and measure.
4. Ensure the Steering Wheel is always straight.
5. Front and Rear Anti Roll Bars are
disconnected.
6. Basically, chassis parts should always be
tightened under 1G conditions (wheels on
the ground).
Page 71