BMW M2 CS RACING 2020 Driver Manual page 65

6.2. SHOCK ABSORBER.
6.2.1. FRONT DAMPER.
Damper Fitting:
1
Front Damper
BMW M2 CS RACING 2020 I DRIVER MANUAL I BMW M MOTORSPORT I V02 I AUGUST 2023
The shock absorbers of the front axle can be removed by loosening the screw-
nut connections (1 - 2) as shown and spread swivel bearing with special tool (3), align it
based with the gap on the rear side of the spring strut and push upwards.
2
3
Pos. Description
1 Hex Bolt M10 x 50
2 Hex Bolt M10 x 80
3 Spreader*
*) Use Spreader to prevent risk of wheel carrier cracking.
Follow safety instructions for lifting the car!
The dampers and fittings must be checked regularly.
Qty.
Tightening Torque
(per Damper)
1
1
Special Tool
1 T/N 8330 0494541
CAUTION
NOTICE
56 Nm
56 Nm
Page 65