Explanation Of Signs; Safety Recommendations; Bluetooth Operation - Party Light & Sound NEBULA User Manual

EXPLANATION OF SIGNS

Accordance with the requirements of UK standards
The product is for indoor use only
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recy-
cling.
1. PRIOR to using the unit for the first time, please charge fully the battery without any interrup-
tion.
2. Charge the battery regularly after each use. Don't wait until it is discharged!
3. DON'T allow the battery to discharge completely, otherwise it will lose 20% of its capacity or even be
totally damaged! If the voltage becomes too low, the internal circuits are not powered anymore, and it will be-
come impossible to recharge the battery!
4. If you don't use the unit for a longer period, it is recommended to charge it at 40% of its capacity and check/
charge it once per month. The lifetime of the battery depends on the observance of these recommendations.
WE CANNOT BE HELD RESPONSIBLE FOR DAMAGED BATTERIES FURTHER TO THE NON-OBSERVANCE

SAFETY RECOMMENDATIONS

• Please read the instructions carefully and keep them for later reference.
• The unit is for indoor use only in a dry location.
• In the event of serious operating problem, stop using the unit immediately.
• The lamps are not replaceable. If they are faulty, the whole device must be discarded.
POWER SUPPLY
Plug the supplied USB-C cable into the USB-C connector on the unit and the other end into a USB port delivering
a voltage of 5V�� 2A. Do not exceed this power.
POWER ON
When the unit is switched on, the motor rotates at medium speed. If no Bluetooth device is connected, it will
just light up. When it is connected to a Bluetooth device, it will light up to the rhythm of the music.

BLUETOOTH OPERATION

Switch the unit on. Activate the Bluetooth search function on your smartphone and select KX168 in the list of
found devices. When you hear a ding-dong sound, pairing was successful. Start playing your music.
FUNCTIONS OF THE BUTTONS
1. ON/OFF switch
2. Light mode selection
3. Short pres s : Next s ong; long pres s :
Volume +
4. Play/pause
5. Short pres s : previous s ong; long pres s :
volume -
6. USB-C input for power cable
7. IR receiver for the remote control
2
INSTRUCTION MANUAL
IMPORTANT NOTE ON LITHIUM-ION BATTERIES
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
OF THESE BASIC RULES.
Code: 16-1063PLS
NEBULA