Table of Contents
Advertisement
TK-701
10. Channel switch replacement (1 ~ 6 CH)
11. Channel limit switch stop screw placement
Proceed after item 3. Installing the stop screw in the
specified
channel
hole
limits
the
number
of
chan-
nels available from the channel switch.
1) Remove the channel selector knob.
2) Reposition the stop screw
in the designated channel
hole.
Note: For replacement of the 16 CH or 32 CH switches,
refer to item 16/32 channel conversion kit.
Proceed after item 3.
1) Pull the channel knob UP from the channel switch.
2) Remove
and
replace the rotary switch
assembly
as
shown.
Note: For six channel configuration, the stop screw is not
needed and may
be stored as shown.
4CH
fo)
|
1CH
Rotary switch ass'y
Re cH
6CH stop storage
Fig. 5-18
Fig. 5-17a
Example:
stop screw
KS)
lacement
—
or two
SS
channels
Switch mounting bracket
Fig. 5-19
Fig. 5-17b
Location
Channels
stop
1/2/3/4/)51/6
forCH1
for CH2
for CH3
for CH4
for CH5
None
Fig. 5-20
5-5
Advertisement
Table of Contents
