LG 55WT30MS Service Manual page 15

Boot file Download
*
1) Execute ISP program "Mstar ISP Utility" and then click
"Config" tab.
2) Set as below, and then click "Auto Detect" and check
"OK" message. If "Error" is displayed, Check connection
between computer, jig, and set.
3) Click "Read" tab, and then load download file (XXXX.bin)
by clicking "Read"
(1)
filexxx.bi
n
4) Click "Connect" tab. If "Can't " is displayed, Check connec-
tion between computer, jig, and set.
5) Click "Auto" tab and set as below.
6) Click "Run".
7) After downloading, check "OK" message.
USB DOWNLOAD(*.epk file download)
*
1) Put the USB Stick to the USB socket
2) Automatically detecting update file in USB Stick
- If your downloaded program version in USB Stick is Low,
it didn't work.
- But your downloaded version is High, USB data is auto-
matically detecting
3) Show the message "Copying files from memory"
4) Updating is staring.
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
(2) (3)
Please Check the Speed :
To use speed between
from 200KHz to 400KHz
.........
5) Updating Completed, The Multi-vision will restart automati-
cally.
6) If your Multi-vision is turned on, check your updated version
and Tool option. (explain the Tool option, next stage)
* Touch Micom(lpc1752/11u14) F/W Option
Settings (ELNEC PG4UW Gang Write)
1) Select the "Load" button (File → Load...).
2) Check the "Erase buffer before loading".
3) Select the rom file and Press the "Open" button.
4) Select the "Program" button (Device → Program)
5) Check the "Calculates the checksum of the interrupt vec-
tors" In "Edit special options" group
6) When a pop-up window appears, Check the "Calculates the
checksum of the interrupt vectors"
7) Press the "OK" button
9) Confirm the checked "Calculates the checksum of the inter-
rupt vectors".
10) Press the "No" button.
- 15 -
LGE Internal Use Only