Advertisement
OPERATION
(Continued)
Priority-Scan
Operation of the radio with the priority function
selected in the scan mode is similar to that of the
non-priority scan mode with one exception.
radio stops scanning ("locks up") on a non-priority
channel the radio will occasionally look at the
priority
channel.
priority channel the radio will stay on the priority
channel; if not, the radio will go back to the
channel
that was interrupted.
Transmitter
B.
To
transmit, select the desired channel, lift
the microphone off-hook, monitor to be sure the
channel is not in use, key the transmitter and speak
into the microphone.
the push-to-talk (PTT) button on the side of the
Two-way
microphone.
the
push-to-talk,
PTT button on the microphone.
message
make the conversation compendious
Note that the PTT button on the microphone is
not enabled when the microphone is on-hook
(microphone
hang-up
ground).
Also, while transmitting, the keyboard is
disabled so accidental pressing of a button on the
keyboard
will not interrupt the
Operation
If there is activity on the
To key the transmitter press
conversation
release-to-listen
When
button
connected
If the
is
accomplished
operation
of
transmitting
and
clear.
to
chassis
transmission.
by
the
a
Advertisement
