Advertisement
OPERATION
(Continued)
LED will blink and the display will turn off while
the radio scans.
the channels in the scan list the scan LED will be
held on and the active channel will be displayed.
After the signal drops out the radio will stay
on the channel for a period of one-half to two
seconds (dealer programmable), at which time the
radio starts scanning again.
lifted off-hook before the radio starts to scan
again the radio will remain locked up on that
channel.
The radio will go to the priority channel
when the microphone is lifted off-hook and the
radio is not locked on an active channel.
microphone is placed back in the hang-up clip the
radio
resumes
Programming the Scan List
Entering a channel into the scan list is
accomplished by pressing the channel to be entered
and the ENTER button on the keyboard.
To delete a channel from the scan list press
the channel to be deleted and press the DELETE
button on the keyboard.
and the next channel in the scan list will be dis-
played.
If deleting consecutive channels in the scan
list, it is not necessary to enter all the channels.
The channels can be deleted by pressing the first
channel number of the sequence; then press the
DELETE button as many times as there are channels
to delete.
For example, to delete channels 3, 4,
and 5 in the scan list select channel 3 and press
the DELETE button three times.
When there is activity on one of
scanning.
The channel will be deleted
If the microphone is
When the
Advertisement
