JVC LT-32MAW205 User Manual page 58

Only in connected mode
8.
topic Pausing Live TV
want to set up Live TV Pause, or if this option is not available to you, select
Done to start watching Live TV.
Repeat the channel scan from time to time to make sure you are receiving all
Tip:
of the latest channels. Broadcasters add and remove channels, move channels to
different parts of the spectrum, and change the power levels of their channels
periodically. Your antenna reception and picture quality depend on the position of
your antenna and on your location relative to the antennas of broadcasters in your
area.
Note:
Antenna TV tile from the Home screen or perform a factory reset. To repeat the
channel scan, go to Settings > TV inputs > Antenna TV > Scan again for channels
> Start finding channels.
•
Press the UP and DOWN arrows to change channels.
•
Press the LEFT arrow to display the channel list (non-connected mode) or
Smart Guide (connected mode), and then use the UP and DOWN arrows to
select a channel to watch. Or press REWIND or FAST FORWARD to jump
through the channel list or Smart Guide a page at a time.
•
Press OK to display information about the current program.
•
Press  to see options for picture and sound settings.
•
Only on models that have a Roku voice remote
say the name of a movie, TV show, actor, or director. The TV displays the result
and the streaming channels that offer the requested content.
United States
, the results also include shows on Antenna TV channels.
Note: If you do not have a Roku voice remote, you can use the Roku mobile app to
search. For more information, see
, you have the option of setting up Live TV Pause. The
explains how to set up and use
Antenna
Getting and using the Roku mobile
52
and re-add the
, hold down or
Only in the
app.
tips:
, and then