Pelonis PHTPU1501WC Owner's Manual page 7

OPERATION INSTRUCTIONS
Check Before Turning On The Machine
• Check if the power wire is under good condition.
• The product adopts 120V AC power supply, before use, please confirm if the rated
current of the power socket meets the local requirements with safe grounding device,
otherwise, please replace it with the qualified socket.
Panel Operation & Display
Timer
Button
• Plug the unit into a grounded 120V outlet, the power light "
ON/OFF
• Repeatedly press the "Function" key so that the heater switches in the
FUNCTION
• In the ECO mode of the machine, press "+" or "-" can set the temperature
TEMPERATURE
SETTING
•
•
TIMER
Swing
Function description
press hte ON/OFF key (or press the ON/OFF key of the remote
controller) for start, the machine supplies air at high power after
start, the digital screen displays "HI".
order of "high gear - low gear - ECO mode - high gear".
value, set the range of 5-35℃.When the room temperature exceeds the set
temperatureat 2℃, the machine stops working, and stay in the standby state.
When the temperature is lower than the set temperature, the machine starts
to heat up again.
Timing stop
When the heater is turned on, press the TIMER key to enter the timing stop
state (within 0-8 hours), then press the "+" key to increase the timing stop
time, and press the "-" key to decrease the timing stop time.
Timing start
When the electric heater is in the standby mode, press the TIMER key to
enter the reservation start mode (within 0-8 hours), then press the "+" key to
increase the reservation start time , and press the "-" key to decrease the
reservation start time .
-, +
06
Dispaly area
ON/OFF
Function
" on,