Product Characteristics; Mounting And Electrical Connection - Gira 5182 00 Operating Instructions Manual

Button interface
4

Product characteristics

– Depending on the variant, two, four or eight independent channels, which work
as inputs or as outputs, depending on the ETS configuration
– Common reference potential for all channels
– Disabling of individual channels
– Supply via the KNX bus, no additional supply voltage necessary
Outputs
– Connection of LEDs
– Short-circuit resistant, overload-protected and reverse-polarity protected
– Switching outputs in parallel possible, for loads with higher energy consump-
tion
Inputs
– Connection of potential-free contacts such as push-buttons, switches or Reed
contacts
– Impulse current for avoiding contact fouling (image of an oxide layer) at the
connected contacts
– Operating functions: switching, dimming, controlling of Venetian blinds, moods
or room temperature
– Value transmitter for dimming, colour temperature, RGBW, temperature and
brightness values
– Transmission of the current input state after bus voltage failure
Additionally for comfort variant inputs
– Connection of door or window contacts for the evaluation of the status open,
closed, tilted and grip position
– Connection of leakage, condensation and temperature sensors (see accessor-
ies)
– Pulse counter with main counter and intermediate counter
– Combination of adjacent input channels for connection of push-button, door
contact and window contact
– Logic functions
5

Mounting and electrical connection

Mount device
In secure operation (preconditions):
– Secure commissioning is activated in the ETS.
– Device certificate entered/scanned or added to the ETS project. A high resolu-
tion camera should be used to scan the QR code.
82407702 13.11.2023
4 / 11