Guideline
Screw, handlebar
clamp
Info
The markings on the handlebar should be at the
center of the handlebar clamps.
Keep the installed gap widths equal when tighten-
ing.
(All EU models)
–
Position the controls on the right half of the handlebar.
S03665-01
(All 500 US models)
–
Position the controls on the right half of the handlebar.
E01235-01
(XCF‑W)
–
Position the controls on the right half of the handlebar.
S03667-01
(All EU models)
–
Position the controls on the left handlebar half.
S01423-01
M8
20 Nm
(14.8 lbf ft)
SETUP 2
7