Table of Contents
Advertisement
4. Installation
4.2 Mounting the Inverter
Dimensions of mounting bracket:
170
Once a suitable location has be found accordingly to 4.1 using figure 4.3 mount the wall
bracket to the wall.
The inverter shall be mounted vertically.
The steps to mount the inverter are listed below:
1. Select the mounting height of the bracket and mark the mounting holes.
For brick walls, the position of the holes should be suitable for the expansion bolts.
2. Lift up the inverter (be careful to avoid body strain), and align the back bracket on the
inverter with the convex section of the mounting bracket. Hang the inverter on the
mounting bracket and make sure the inverter is secure (see Figure 4.4)
WARNING:
The inverter must be mounted vertically.
515
Figure 4.3 Inverter wall mounting
Figure 4.4 Wall Mount Bracket
10
User Manual
unit:mm
Advertisement
Table of Contents
