Advertisement
Note 4: Test equipment: AS-114B
Note 5: The voltage shown above should be applied to the lamp for more than 1 second after startup.
Otherwise, the lamp may not be turned on normally.
Note 6: Inverter should provide more than min. value, and then lamp could be completely turned on.
Note 7: Lamp frequency may produce interference with horizontal synchronous frequency and this may
cause line flow on the display. Therefore lamp frequency shall be detached from the horizontal
synchronous frequency and its harmonics as far as possible in order to avoid interference.
Note 8: Life time (Hr) is defined as the time when brightness of a lamp unit itself becomes 50% or less
than its original value at the condition of Ta = 25±2°C and I
Backlight connecter: 3500IHS-02L
Pin no.
1
2
3
4
Symbol
VIH
Lamp high voltage input
VIL
Lamp low voltage input
VIH
Lamp high voltage input
VIL
Lamp low voltage input
SPEC NO.
PAGE
Function
M T 1 8 5 G W 0 1 V. 0
14/23
= 7.5mArms.
L
Remark
Cable color: Pink
Cable color: White
Cable color: Blue
Cable color: Black
Advertisement
