Table of Contents
Advertisement
19. What is WAN Failover?
Once Wi-Fi has been activated as the internet source, the Roam 5G Combo uses WAN failover as default.
This feature is designed to overcome the need to manually switch the internet source between mobile and
Wi-Fi. When a Wi-Fi connection has been set up, the Roam 5G Combo Router will prioritise this as the source of
internet and only use the mobile connection when the Wi-Fi is no longer available.
Troubleshooting and FAQ's - For TV reception & Signal Booster
1. I have no picture on my TV or the picture is breaking up/freezing?
- Ensure all connections are correct
- Ensure the Variable Signal Booster power LED is on
- Try adjusting the gain control on the Variable Signal Booster (turn to right to increase gain.
We suggest you start with 100% gain and reduce if in a high strength area)
- To maximise the number and quality of channels found, you will need to retune your TV/Freeview box
when changing locations, the aerial is likely to be picking up channels from different transmitters
2. Power LED is not lit on my Variable Signal Booster
- Ensure power switch is in the on position
- Ensure the power source is connected correctly
- Check the inline fuse in the power cable
3. Should I be using the Variable Signal Booster (VSB) in Line with my Roam 5G Combo?
We recommend always using the VSB in-line as this will boost the signal quality significantly.
However, in some areas where the signal strength is good, it may not be necessary to use the VSB
4. Can I change the length of the cable supplied with my Roam 5G Combo?
- Yes, you can shorten the cable by cutting it to the required length and refitting the F connector.
- Details on how to fit the F connector on page 9
- You can lengthen the cable by using a back to back connector and some additional F cable or a flylead
- Please note, longer cable may introduce signal losses and reduce signal quality
5. How should I clean my Roam 5G Combo. Do I need to carry out any maintenance?
- The Roam 5G Combo has been designed to be maintenance and trouble free
- If you do wish to clean your 5G Combo Antenna, use a sponge with mild soap and a minimal amount of water
- Never use a powerful flow of water, power washer or solvents to clean
40
Advertisement
Table of Contents
