Page 4
ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN H/P OUT CLOCK...
Page 5
CLOCK Satellite IN OPTICAL DIGITAL AUDIO OUT...
Page 6
AV IN COMPONENT IN VIDEO L/MONO AUDIO R AUDIO VIDEO...
Page 8
43UW950H-ZA 51.0 12.1 11.7 AC 100-240 V ~ 50 /60 Hz Power requirement...
Page 9
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
Safety instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on WARNING earth.) Otherwise possibility you may be electrocuted or injured. Do not place the TV and/or remote control in the following Insert power cable plug completely into wall socket otherwise if not environments:...
Page 11
Do not drop the product or let it fall over when connecting external Do not drop metallic objects such as coins, hair pins, chopsticks or wire devices. Otherwise, this may result in injury or damage to the product. into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Page 12
Only use an authorized AC adapter and power cord approved by If you install the TV on a stand, you need to take actions to prevent the LG Electronics. Otherwise, this may result in fire, electric shock, product from overturning. Otherwise, the product may fall over, which malfunction or product deformation.
Page 13
When installing the antenna, consult with a qualified service When connecting external devices such as video game consoles, make technician. If not installed by a qualified technician, this may create a sure the connecting cables are long enough. Otherwise, the product fire hazard or an electric shock hazard.
Page 14
Protect the power cord from physical or mechanical abuse, such as When moving the product, make sure you turn the power off first. Then, being twisted, kinked, pinched, closed in a door, or walked upon. Pay unplug the power cables, antenna cables and all connecting cables. particular attention to plugs, wall outlets, and the point where the cord The TV set or power cord may be damaged, which may create a fire exits the appliance.
• If you watch a 3D video for a long time, you may experience eye period of time. fatigue. In this case, stop watching the 3D video and take a rest. • Only use LG 3D glasses. Otherwise, you may not be able to view 3D Generated Sound videos properly.
Preparing CAUTION • Do not use any unapproved items to ensure the safety and product life span. NOTE • Any damage or injuries caused by using unapproved items are not covered by the warranty. • If the TV is turned on for the first time after it was shipped from the • ...
Lifting and moving the TV Using the button Please note the following advice to prevent the TV from being scratched (Depending on model) or damaged and for safe transportation regardless of its type and size. You can simply operate the TV functions, using the button. • ...
Attaching the TV to a desk <B type> Power On (Press) (This feature is not available for all models.) Power Off (Press and Hold) The TV should be attached to a desk so it cannot be pulled in a forward/ Menu Control (Press backward direction, potentially causing injury or damaging the product.
We recommend the use 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with of the TV.
Separate purchase(Wall Mounting Bracket) NOTE • When installing the wall mounting bracket, use the adhesive label 43UW76** 49/55UW76** or protective cover provided. The adhesive label or protective cover Model 32/43LW64** 49/55UW96** will protect the opening from accumulating dust and dirt. (Only 43UW95** when the label or cover is provided) VESA (A x B) (mm) 200 x 200...
Connections (notifications) Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). • Use a signal splitter to use more than 2 TVs. Connect various external devices to the TV and switch input modes to • ...
Speaker Output Setup Network Setup (Depending on model) Wired network connection (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication.
Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. General HDMI ULTRA HD Deep • Colour - On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) - Off : Support 4K @ 50/60 Hz 8 bit (4:2:0) If the device connected to Input Port also supports ULTRA HD Deep Colour, your picture may be clearer.
/ By pressing the AD button, audio descriptions function will be LG Electronics will also provide open source code to you on CD-ROM enabled. (depending on model) for a charge covering the cost of performing such distribution (such / Sets the alarm function.
Troubleshooting Specifications The software version can be updated for improvement in performance. Wireless module specification Customer needs to ensure the compatibility of customer’s equipment • As band channels can vary per country, the user cannot change or with LGE software. If needed, please consult with LGE and upload adjust the operating frequency.
CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % (Depending on country) Digital TV Analogue TV...
Page 27
HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode (Depending on model) Frequency (kHz) Frequency (Hz) Horizontal Vertical Frequency 31.47 59.94 Resolution 720 x 480 Frequency (kHz) (Hz) 31.50 60.00...
Page 28
3D supported mode (Only 3D models) • Video, which is input as below media contents is switched into the 3D screen automatically. The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. For models supporting Miracast / Intel®...
Page 29
3D supported mode manually Signal Input Playable 3D video format Horizontal Vertical Resolution Frequency (kHz) Frequency (Hz) 1024 x 768 48.36 60.00 1920 x 1080 67.50 54.00 24.00 3840 x 2160 56.25 25.00 HDMI-PC 2D to 3D, 67.50 30.00 Side by Side(half), Top & Bottom 4096 x 2160 54.00 24.00...
Page 30
3D supported mode manually Signal Input Playable 3D video format Horizontal Vertical Resolution Frequency (kHz) Frequency (Hz) 37.50 50.00 1280 x 720 45.00 60.00 44.96 59.94 33.75 60.00 1920 x 1080i 33.72 59.94 28.12 50.00 67.50 60.00 2D to 3D, Component Side by Side(half), Top &...
Photo format Video codec File Extension Codec Format Resolution Format VC-1 Advanced Profile (WMVA Minimum: 64 (W) x 64 (H) .jpeg, .jpg, Video excluded), VC-1 Simple and Main JPEG Maximum: 15,360 (W) x 8,640 (H) / .asf .jpe Profiles Progressive Type: 1,920 (W) x 1,440 (H) .wmv WMA Standard (WMA v1/WMA Speech Minimum: 64 (W) x 64 (H)
Page 32
IR CODES This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button (Power Remote control Button (POWER) On/Off) Remote control Button (BACK) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button...
EXTERNAL CONTROL Phone jack Type DEVICE SETUP (TV) (PC) (Depending on Model) • You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified RS-232C IN (CONTROL & SERVICE) (PC) (TV) in the manual.
Command Reference List RS-232C Configurations (Depending on Model) 7-Wire Configurations (Standard RS-232C cable) DATA COMMAND1 COMMAND2 (Hexadecimal) 01. Power 00 to 01 02. Aspect Ratio (See p. 4) 03. Screen Mute (See p. 5) 04. Volume Mute 00 to 01 05.
Transmission / Receiving Protocol 01. Power (Command: k a) ► To control Power On/Off of the set. (Depending on Model) Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Power Off 01 : Power On [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) [a][ ][Set ID][ ][OK/NG][Data][x] [Command 2] : Second command to control the TV.
Page 36
03. Screen Mute (Command: k d) 06. Contrast (Command: k g) ► To select screen mute on/off. ► To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][d][ ][Set ID][ ][Data][Cr] Transmission [k][g][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Video mute off...
Page 37
09. Tint (Command: k j) 12. Remote control lock mode (Command: k m) ► To adjust the screen tint. ► To lock the front panel controls on the monitor and remote control. You can also adjust tint in the PICTURE menu. Transmission Transmission [k][m][ ][Set ID][ ][Data][Cr]...
14. Colour Temperature (Command: x u) 16. Auto Configuration (Command: j u) (Only RGB support model) ► To adjust colour temperature. You can also adjust Colour ► To adjust picture position and minimize image shaking Temperature in the PICTURE menu. automatically.
Page 39
20. Key (Command: m c) 18. Tune Command (Command: m a) ► To send IR remote key code. ► Select channel to following physical number. Transmission Transmission [m][c][ ][Set ID][ ][Data][Cr] [m][a][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][Cr] Data 00 : High channel data Data IR CODES...
Page 40
Input Number Data Input1 Input2 Input3 Input4 [b][ ][Set ID][ ][OK/NG][Data][x] * Real data mapping 00 : Step 0 Step 10 (Set ID 10) Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 :...
Need help?
Do you have a question about the UW950 Series and is the answer not in the manual?
Questions and answers