Table of Contents
Advertisement
On Screen Display(OSD) Selection and Adjustment
Main menu
SETUP
MENU : Exit
: Adjust
: Adjust
SET : Select another sub-menu
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
Sub menu
SETUP
LANGUAGE
OSD
POSITION
WHITE
BALANCE
POWER
INDICATOR
FACTORY
RESET
POWER
REDUCTION
Description
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
Restore all factory default settings except
"LANGUAGE."
Press the
,
Use this function to set the power
reduction to ON or OFF.
If you set OFF, it will go off.
If you set ON , it will automatically be
turned on.
A14
buttons to reset immediately.
Advertisement
Table of Contents
