Table of Contents
Advertisement
13.9 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press
To resume the programme, after
3.
the desired soaking time, press
.
13.10 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press
.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
.
5.
13.11 Cancelling the pro-
gramme
Press
.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select
a suitable programme for drain-
ing.
→ "Programmes", Page 23
Remove the laundry.
3.
→ "Unloading the laundry",
Page 29
13.12 Resuming the pro-
.
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 22
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the Spin programme or a
1.
programme for draining the water.
→ "Programmes", Page 23
Press
2.
13.13 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.14 Switching off the appli-
Turn the programme selector to
1.
Off
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
gramme when the pro-
gramme status is Rinse
Hold
.
ance
.
operation en
29
Advertisement
Table of Contents
