Table of Contents
Advertisement
Using the Shortcut Menu
The following content is for general reference only. Actual product specifications may vary.
The OSD can be used for adjusting the settings of your OLED Monitor. Press the Any key
to open the Navigation OSD. You can use the OSD to adjust the picture quality, OSD
setting and general settings. For advanced settings, please refer to following page:
Hot key1 -
Brightness
1.
When OSD Menu is off, press UP button to show Brightness hotkey OSD.
2.
Adjust the brightness from 0 to 100, default values is 50
Note: When display in one-line communication status, brightness will be limited by power
supply, default value is 5.
Hot Key 2 – Volume
1.
When OSD Menu is off, press DOWN button to show Volume hotkey OSD.
2.
Adjust the Volume from 0 to 100, default values is 50
Note: When display in one-line communication status, Volume will be limited by
power supply, default is 30.
8
Advertisement
Table of Contents
