Table of Contents
Advertisement
Adjusting the Input
1.
Press the MENU key to open the OSD.
2.
Toggle the button to the up or down to select Input from the OSD.
3.
Input: Select the source from Type-C，MiniHDMI
--------------------------------------------------------------------------------------------------------
---Note: Default Auto source :Automatically searches for available input
sources.Search for HDMI signal first, then Type-C
Adjusting the OSD
1.
Press the MENU key to open the OSD.
2.
Toggle the button to the up or down to select OSD from the OSD.
3.
Toggle to the up or down to adjust the sliding scales.
4.
OSD timeout: Adjust the delay before turning off the OSD menu,Default
value is 5.
5.
OSD menu transparency: Adjust the OSD menu transparency from 0 to 10.
10 is not 100% transparency,Default value is 0.
12
Advertisement
Table of Contents
