Advertisement
Quick Links
Record Player Stand
Model:HO-RS001
Assembly Instructions
IMPORTANT
Please read and understand this manual before beginning assembly of the product,
and make sure all parts are present. Compare parts with packaging contents list.
If any part is missing, or if you have any questions,
contact the service centre at E-mail:
support@haioou.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HAIOOU HO-RS001
Summary of Contents for HAIOOU HO-RS001
- Page 1 Record Player Stand Model:HO-RS001 Assembly Instructions IMPORTANT Please read and understand this manual before beginning assembly of the product, and make sure all parts are present. Compare parts with packaging contents list. If any part is missing, or if you have any questions, contact the service centre at E-mail: support@haioou.com...
- Page 3 Parts for reference: Cam bolt (x48) Top track wheel (x2 ) Cam lock (x48) Lower track wheel (x2) 8x40mm Large wooden dowel (x14) Socket (x1) 3.5x14mm (x20) Screw Rubber grommet (x2 Door handle (x 1) LED strip lights (x1) Fixed tool (x2) NOTICE : 1.
- Page 4 Attach 2 Cam bolts (A) onto Panel , secure Panel to Panel using 2 Cam locks (B). 1. Attach 6 Ccam bolts (A) onto P ) onto...
- Page 5 Secure Panel ③ onto Panel ⑭ using 2 Large wooden dowel (C).Fix with 2 cam locks (B) and 2 cam bolts (A) as shown below Secure Panel ③ onto Panel ⑤ using 2 Large wooden dowel (C). Fix with 2 Cam locks (B) and cam bolts (A) as shown below...
- Page 6 p over the main part,s (A) onto the holes of Panel anel vertically against Panel anel Cam locks(B) and Cam bolts(A) set...
- Page 7 Attach 6 Cam bolts...
- Page 8 f panel 2. Install the rubber grommets (I) on the holes of panel part m bolts(A), Cam...
- Page 10 Insert 8 Cam bolts (A) onto the bottom Secure the base/feet to the main part using Cam bolts (A) and Cam locks (B) set...
- Page 11 1. Secure part (G) at the lower edge of Panel , while secure part (F) at the upper edge of panel x1 6 2. Fix the door handle (E) to Panel 3. Place the door/Panel /rails of Panel 4. Install record divider/part Panel Enable the LED strip light (J) by plugging into the standard USB port as shown below.
- Page 12 20kg/44lb 20kg/44lb 30kg/66lb 30 1/2 x 33 4/9 x 14 3/8 Inch 77.5x85x36.5cm 48.4lb 22kg...
Need help?
Do you have a question about the HO-RS001 and is the answer not in the manual?
Questions and answers