1. Manuals
  2. Brands
  3. RTI Manuals
  4. Projector
  5. PIKO Series
  6. Manual

RTI PIKO Series Manual

Full color laser projector
Hide thumbs Also See for PIKO Series:
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S MANUAL
Version 2023-12
LaserAnimation Sollinger GmbH | Crellestr. 19/20 | D-10827 Berlin
Phone +49 (30) 780 963 00 | Fax +49 (30) 780 963 25
Email info@laseranimation.com | www.laseranimation.com
Copyright © LaserAnimation Sollinger GmbH. All rights reserved
ISO 9001:2015
certified
RTI PIKO SERIES
Full Color Laser Projector

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PIKO Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for RTI PIKO Series

Summary of Contents for RTI PIKO Series

  • Page 1 USER‘S MANUAL Version 2023-12 RTI PIKO SERIES Full Color Laser Projector LaserAnimation Sollinger GmbH | Crellestr. 19/20 | D-10827 Berlin Phone +49 (30) 780 963 00 | Fax +49 (30) 780 963 25 Email info@laseranimation.com | www.laseranimation.com Copyright © LaserAnimation Sollinger GmbH. All rights reserved...
  • Page 2 RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 Legal Notice LaserAnimation Sollinger GmbH reserves the right to make changes to its products for the purpose of technical improvement. These changes are not necessarily documented in each specific case. This document and the information contained herein have been prepared with the utmost care. No responsibility can be taken for the unlikely case of printing or other errors and any resulting damage.

  • Page 3: Table Of Contents

    Technical Drawing - RTI PIKO Housing . . . . . . . . . . . . . . . . .

  • Page 4: Contents Of Package

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 1 Contents of Package Please make sure that all components were delivered correctly. Please also compare the separately supplied packing list If something is missing, please contact your sales contact. Name Picture Laser projector...

  • Page 5: Safety Hints

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 2 Safety Hints 2.1 General Hints The laser projector is intended only for proper use for projecting laser beams onto a projection surface (walls, screens) or into space indoors or outdoors. The device may not be used when there is visible damage to the housing, the connectors in the rear, especially the electric power supply, or the connecting cables.
  • Page 6 RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 When operating the device in humid or special outdoor conditions that can lead to con- densation: Allow the device to acclimatize sufficiently at the place of use. Use LA.toolbox to check the internal temperature of the unit and the dew point.

  • Page 7: Hints For Laser Safety

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 2.2 Hints for Laser Safety Caution – use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This laser product is designated as Class 4 during all procedures of operation, maintenance and service .
  • Page 8 RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 • Never let the laser run unattended. • Make sure that no unauthorized persons have access to your laser system. The operation of laser equipment in the event sector with an audience requires an approval...
  • Page 9 RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 1. Laser radiation! Avoid exposure to beam 2. Laser class 4 3. Caution of radiation if cover is removed 4. Model type 5. Production year 6. Output power 7. Wavelength 8. Power supply & consumption LaserAnimation Sollinger GmbH | Crellestr.

  • Page 10: Connectivity And Physical Features

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 3 Connectivity and Physical Features 3.1 Overview All included signal cables are shielded . In case you use other cables (e .g . for remote control, Interlock, external key switch) it is essential to use shielded cables only.

  • Page 11: Connectivity

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 3.2 Connectivity 3.2.1 Mains Connection The projector can be operated with supply voltages of 86 VAC – 264 VAC / 47 – 63 Hz. Note: If the provided mains cable does not correspond with your existing mains supply please use an appropriate adapter for mains connection.

  • Page 12: Avb

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 3.2.2 AVB Your projector can be controlled via AVB (Audio Video Briding) by means of an external AVB stream. To control your PIKO using AVB, please make sure that you exclusively use the “LAN 1” port of your projector as LAN 2 and LAN 3 are internally routed towards ShowNET or FB4.
  • Page 13 RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 • The operation of laser systems with lasers class 4 requires an emergency stop (E-Stop). Regardless of the way the laser is operated, an E-Stop must always be connected. • Place the E-Stop so that you can reach it immediately in emergency situations.
  • Page 14 RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 For the connection between the laser projector and the DMX console, please use a DMXCable Type EIA RS-485, Shielded, Twisted Pair 3.2.6 LAN The laser unit can be integrated into an Ethernet network using the LAN ports on the rear side of the unit.

  • Page 15: Installation And Commissioning

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 4 Installation and Commissioning 4.1 Installation 4.1.1 Hanging Operation The laser projector is equipped with an extra stable stainless steel yoke for hanging operation (truss or tripod). For mounting you will need minimum one C-clamp (not included).

  • Page 16: Hints For Application Of The Integrated Beam Blocker

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 4.1.3 Hints for Application of the integrated Beam Blocker A beam block panel is integrated into the front panel for safety reasons. This convenient cover can be used to blank the laser output in order to protect the audience in a certain area.

  • Page 17: Commission

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 4.2 Commission 4.2.1 Power On The device is not equipped with a power switch. The power supply should only be performed by connecting respectively disconnecting the laser projector to or from the mains.

  • Page 18: Control

    Edited: 2023-12 5 Control 5.1 LA.toolbox The RTI PIKO operating modes and main settings can be configured easily using the „LA.toolbox“ software. This intuitive software allows to monitor important functions of the laser unit and adjust operating parameters. The LA.toolbox communicates with the laser projector via LAN 1 port. The software offers PC installation for Windows 7/8.1/10/11 operating systems.

  • Page 19: Maintenance Hints

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 6 Maintenance Hints Ensure the laser is turned off and the device is disconnected from the mains before conducting any maintenance . Please ensure that the fans of the projector are checked regularly.

  • Page 20: Malfunction

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 7 Malfunction Check the mains connection! In case of a malfunction, first check the mains connection and the mains cable. If needed, change the power cable. Additionally, check the device fuse as it may be faulty. Replacing the fuse is easy - remove the fuse holder next to the power connector using a screwdriver and replace the defective fuse by a new one with identical values: T 10A.

  • Page 21: Pin Assignments

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 8 Pin Assignments 8.1 ILDA in, ILDA out ILDA in (25 pin D-sub male) ILDA out (25pin D-sub female) Notes: n.c. means not connected | all signal lines are true differential Pin No.

  • Page 22: Remote Connector

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 8.2 Remote Connector 8.2.1 7pin XLR female Pin No. Signal Meaning Interlock Interlock loop: INTERLOCK ON: when both Interlock lines are connected to each other Interlock Remote Key KEY ON (external key switch): if connected to VCC (pin 6) +24V max.

  • Page 23: Dmx

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 8.3 DMX Valid for RTI PIKO laser projectors with integrated ShowNET or FB4. DMX in (male) DMX thru (female) Pin No. DMX in DMX thru DMX Shield DMX Shield DMX In- DMX THRU-...

  • Page 24: Technical Specifications

    900 W Dimensions 491 x 271 x 296 mm Weight (net) 27 kg RTI PIKO 42 ROGB | RTI PIKO 45 RYGB RTI PIKO 42 ROGB - device-dependent laser specifications: Total power (after optics) 42 W Power per color (at module)
  • Page 25 LAS Mainboard with AVB, LA.toolbox and ShowNET Power supply 85 VAC – 264 VAC, 50 - 60 Hz, universal Operating temperature +5°C to +45°C (RTI PIKO 46) | max. +35°C (RTI PIKO 65 | RTI PIKO 80) IP raded IP54 Power consumption...

  • Page 26: Final Statement

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 Final statement All our products and their packaging are individually checked and leave our facilities in a flawless and proper condition. If you notice any damage or defects when receiving the product, please contact your dealer immediately.

  • Page 27: Eu Declaration Of Conformity

    EU Declaration of Conformity Manufacturer: LaserAnimation Sollinger GmbH Product Name: RTI PIKO 33 RGB RTI PIKO 46 RTI PIKO 38 RGB RTI PIKO 65 RTI PIKO 42 ROGB RTI PIKO 80 RTI PIKO 45 RYGB RTI PIKO 50 G Products covered by this declaration: Laser display systems We here declare that the product described above is in conformity with the following directives: —...

  • Page 28: Technical Drawing - Rti Piko Housing

    RTI PIKO SERIES USER‘S MANUAL Edited: 2023-12 Technical Drawing - RTI PIKO Housing LaserAnimation Sollinger GmbH | Crellestr. 19/20 | D-10827 Berlin Phone +49 (30) 780 963 00 | Fax +49 (30) 780 963 25 Email info@laseranimation.com | www.laseranimation.com Copyright © LaserAnimation Sollinger GmbH. All rights reserved...

This manual is also suitable for:

Piko 36 g opslPiko rygbPiko rogbPiko rgbPiko 33Piko 38 ... Show all

Table of Contents