AEG 860 D Instructions For Installation And Use Manual page 19

Cleaning the
metal fat filter
Active carbon
filter
44
To remove and then clean my metal fat filter grille, proceed as
follows: i
1. Press the lock on the fat filter grille inwards and detach the fat
filter at the front and rear.
3. After cleaning, re-insert both dry metal fat filters.
4. Re-insert the fuses and reconnect the appliance.
To remove and then replace 2 KL 600 carbon filters (E-No.
610 899 470) (for your own account from our range of special
accessories), proceed as follows:
For reasons of safety against any unintentional switching on,
remove my screw-in fuse from the holder or switch off my
automatic fusing system in the fusebox.
WPFA4 5/90 — WKA2 5/90 GB/EU