Troubleshooting Guide - FUNAI F9TRF1 Owner's Manual

TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
CORRECTIVE ACTION
AC Power cord is not connected.
© DC battery car cord is not connected
while TV/VCR is installed in vehicle.
© Fuse іп car battery cord is blown.
Connect AC power cord to AC outlet.
* Connect battery cord to vehicle's cigarette
lighter socket and to 12V DC jack on back
of TV/VCR.
* Replace with 5A, 250V fuse.
No picture and sound.
* TV/VCR is not plugged into an active.
AC outlet.
© Antenna is not connected.
* No channel in memory.
* Plug power cord into an active AC outlet.
** Check antenna connection.
* Program tuner's memory.
No picture or poor picture
on TV/VCR.
* Direction or condition of antenna is not
adequate.
* Picture control is not adequate.
* No channel in memory.
• Adjust direction or replace antenna.
* Adjust picture controls.
* Program tuner's memory.
No sound or poor sound.
** Volume control on remote control unit
or main unit is in minimum position.
* MUTE button on the remote control
unit is in the ON position.
* Adjust volume control on remote control
unit or set.
* Press MUTE button.
Timer recording is not
possible.
© The timer recording is set incorrectly.
* The timer recording is not set to ON.
* Clock is not set correcttly.
© Set the timer recording correctly.
* Set the timer recording to ON.
® Follow directions for setting clock.
Cannot go into Record
mode.
© The erase-prevention tab on cassette is
missing.
* Place transparent tape over missing erase-
prevention tab.
Playback picture is
partially noisy.
* The TRACKING control is not set
correctly.
* Adjust TRACKING control for better
picture.
Noise in picture on
playback.
* Video heads are dirty.
* Head cleaning is necessary, consult the
nearest Funai Service Center.
No operation by infrared
Remote Control.
© No power to TV/VCR.
* Weak batteries.
• Make sure the AC cord is connected to an
AC outlet.
* Check the batteries in infrared Remote
Control.