Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often
overlooked possibilities. Before arranging for service, check these items. It could save your time and
money.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
No picture and sound.
% TV is not plugged into an active.
AC outlet.
*
Plug power cord into an active AC
outlet.
loose.
* Antenna is not connected.
* Checkantenna connection.
* Nochannel in memory.
* Program tuner's memory.
Sound ОК; poor picture.
* Direction or condition of antenna|*
Adjust direction or replace an-
is not good.
tenna.
* Picture control is not good.
* Adjust picture controls.
* Interconnecting
cable
is con-| Connect
incoming antenna
di-
nected to another source.
rectly to the television.
Picture OK; poor or no sound.
* Volume control on remote contro! |* Adjust volume control on remote
unit or set is in minimum position.|
control unit or set.
MUTE button on the remote соп-|% Release MUTE button.
trol unit is in the ON position.
TV channels don't work.
* Antenna connection is loose.
* Fix connection.
Hissing noise from speaker and
snow on TV screen.
Ф Channel selector in wrong рові-|% Check that the channel selector is
tion.
in the air position.
Cannot tune cable channels, with
|% TV/CATV button on the remote|* Select the CATV position with re-
CATV connected to 75 ohm ANT
control is not in CATV position.
mote control.
terminal.
% САТУ
antenna
connection
is|€ Fix connection.
TV tuner and CATV skips stations.
* Station
has
been
incorrectly
added and erased.
* Batteries in remote control unit аге
weak.
*
*
Reprogram the tuner memory.
Replace batteries in remote con-
trol unit.
Remote control does not work.
* Batteries are weak or dead.
Not
within
effective
operating
range.
-16-
*
Ж
Replace the batteries.
Move closer to the TV.
EN
Advertisement
Table of Contents
