Helios AIR1-AAHA Installation And Operating Instructions Manual page 6

Installation and Operating Instructions
EN
CHAPTER 1
SAFETY
mm
DANGER
m
WARNING
m
CAUTION
ATTENTION
Outside air intake hood – AIR1-AAHA / Exhaust air discharge hood – AIR1-AAHF
1.1 Important information
In order to ensure complete and effective operation and for your own safety, all of the following instructions should be
read carefully and observed.
This document should be regarded as part of the product and as such should be kept accessible and durable. The
operator is responsible for complying with all plant-related safety regulations.
1.2 Warning instructions
The adjacent symbols are safety-relevant prominent warning symbols. All safety regulations and/or symbols
in this document must be absolutely adhered to, so that any risks of injury and dangerous situations are pre-
vented!
m
DANGER
Indicates dangers which will directly result in death or serious injury if the safety instruction is not followed.
m
WARNING
Indicates dangers which will result in death or serious injury if the safety instruction is not followed.
m
CAUTION
Indicates dangers which can result in injuries if the safety instruction is not followed.
ATTENTION
Indicates dangers which can result in material damage if the safety instruction is not followed.
1.3 Safety instructions
Special regulations apply for use, connection and operation; consultation is required in case of
doubt. Further information can be found in the relevant standards and legal texts.
m With regard to all work, the generally applicable safety at work and accident prevention
regulations must be observed!
• Do not stand under suspended loads!
• The installation must only be carried out by suitable specialist personnel!
• Only transport fans using means of transport that are appropriate for the weight. Wear pro-
tective footwear during transport!
• Wear protective gloves/footwear when unpacking the unit.
• Ensure the suitable load capacity and properties of the mounting surface and use suitable
mounting material.
• All plant-related safety regulations must be observed! If applicable, further country-specific
regulations must also be observed!
• The outlet area must be kept free from objects and material that could be ejected.
• A uniform inflow and free outlet must be ensured!
1.4 Area of application
Intended use:
The outside air intake hood or exhaust air discharge hood is designed for installation on an AIR1 ventilation unit in
series XH or RH to prevent the freezing of dirt particles or the like. The outside air intake hood has a droplet separator
to prevent the ingress of water in the ventilation unit.
The outside air intake hood or exhaust air discharge hood is designed exclusively for AIR1 ventilation units in series XH
or RH from Helios Ventilatoren.
AIR1-AAHA
Outside air intake hood
1.5 Personnel qualification
The installation may only be carried out by specialists (e.g. industrial mechanics, mechatronics engineers, metal workers
or persons with comparable training).
AIR1-AAHF
Exhaust air discharge hood
1