Table of Contents
Advertisement
6
Customization
Mask Settings
Customize GNSS satellite mask from "Mask settings" menu.
If there is a tall building at a specific elevation or azimuth
angle, the performance of TB-1 can be improved by
disabling the use of those satellites for positioning.
Select "Read from TB-1" to show the current settings.
Choose a specific azimuth angle by tracing the perimeter of
the sky plot, and adjust the elevation angle by drawing the
bar next to the sky plot.
⊕
Click
to add new mask, or
Select "Send to TB-1" to apply the new settings.
Add/remove the mask settings from "Favorites".
※The mask settings will be reset when power-off condition
occurs.
※Add/remove the mask settings from "Favorites" needs
internal storage access on Android device.
10
TB-1
Operation Manual
SE20-900-014-02
⊗
to delete current mask.
Advertisement
Table of Contents
