Operation - Polaris Hammerhead Off-Road Torpedo 2024 Owner's Manual

OPERATION

IMPORTANT INFORMATION
Failure to operate the vehicle properly can result in a collision, loss of control,
accident or rollover, which may result in serious injury or death. Read and
understand all safety warnings outlined in the safety section of this owner's
VEHICLE BREAK-IN PERIOD
The break-in period for your new HAMMERHEAD vehicle is defined as the first
five (5) hours of operation.
No single action on your part is as important as a proper break-in period. Careful
treatment of a new engine and drive components will result in more efficient
performance and longer life for these components. Perform the following
procedures carefully.
Excessive heat build-up during the first three hours of operation will damage
close-fitted engine parts and drive components. Do not operate at full throttle
or high speeds during the first three hours of use.
Mixing brands or using a non-recommended oil may cause serious engine
damage. Always use the recommended oil. Never substitute or mix oil brands.
ENGINE AND DRIVETRAIN BREAK-IN
1. Fill the fuel tank with gasoline. Always exercise extreme caution whenever
handling gasoline. See the Refueling section for details.
2. Check the oil level. See the Oil Check section for details. Add the
recommended oil as needed to maintain the oil level in the safe operating
range.
3. Complete the steps detailed in the New Operator Driving Procedures
section.
4. Avoid aggressive use of the brakes. See Brake System Break-in section for
details.
5. Vary throttle positions. Do not operate at sustained idle.
6. Perform regular checks on fluid levels, controls, and areas outlined on in the
Pre-Ride Inspection section's checklist.
WARNING
manual.
NOTICE
OPERATION
31