Parts And Their Functions - Panasonic DVCPRO AJ-DE77P Operating Instructions Manual

Non-linear editing system
Hide thumbs Also See for DVCPRO AJ-DE77P:
Table of Contents

Advertisement

Front Panel
7)
Parts and Their Functions
©
GGG
G
@ Main unit power switch
Set this switch to the OFF position after quitting
the system.
If the power is turned off while the
hard disk drive is operating, data may be lost or
the drive may be damaged.
Do NOT turn off the power while white characters
on a blue background appear on the monitor
display (for the personal computer) during startup.
@ Main unit power LED
© HDD sub switch
Press this switch if PC unit's power does not come
on even when the main unit power switch is set to
ON.
Do not press this switch without good reason
since the power of the PC unit will be turned off if
it pressed while the power is supplied.
© HDD reset switch
Press
this switch
when
the
PC
unit is not
operating properly.
The start screen will now be
restored, and checks on the operation can be
carried out.
Do NOT press this switch while white characters
on a blue background
appear
on the monitor
display (for the personal computer) during startup.
Phones jack
The
sound
can
be
monitored
when
stereo
headphones are connected to this jack.
Phones volume control
This is used to adjust the headphones volume and
the monitor output volume.
H
Cassette slot
M cassettes or L cassettes are loaded through this
slot. Consumer-use cassettes cannot be used for
recording or playback.
Cassette tape EJECT button.
When this button is pressed, the tape is unloaded,
and the cassette is automatically ejected several
seconds later.
© CD-ROM drive
J Tray OPEN/CLOSE button
Q) Floppy disk drive
ΠCarrying handle
(Ð HDD access display lamp (system)
(D HDD access display lamp (AV data)
B Screws for securing mechanism
Loosen these screws when cleaning the head
mechanism transport system of the VTR unit or
when
conducting
other kinds of servicing
or
maintenance.
It will then be possible to pull out
the VTR unit's mechanism.
After the maintenance work has been completed
or when the unit is to be moved, the mechanism
must be put back inside the unit and the screws
tightened up securely.

Advertisement

Table of Contents
loading

Table of Contents