Switches And Controls - Rotel RB-990BX Owner's Manual

SPEAKERS AND PREAMPLIFIER CONNECTION
1. Conned the speaker cord of me rigtil speaker lo me
RIGHT terminals and the cord of the left speaker to me
LEFT terminals of SPEAKERS terminals. Note me + -
connection (+ lead lo + terminal and - lead lo -
terminal).
2. Usin9 two cables wim phono connectors, conned the
OUTPLfT L jack of the preamplifier lo me INPUT LEFT jack
of this unit and the OUTPUT R jack of the preamplifier to
the INPUT RIGHT jack of this unit.
HOW TO CONNECT THE SPEAKER CORDS TO THE
SPEAKERS TERMINALS
strip the cord end and twist leads lirmly. then connect it to
the SPEAKERS terminal. The SPEAKERS terminals of this
unit are screw type. Turn the screw counterclockwise and
insert the cord end. Then lighten the screw firmly by turning
clockwise so that the speaker cord cannot be pulled out
accidentally.
SPEAKER CONTROL AMPLIFIER
LEFT
RC-980eX
SPEAKER
RIGHT
SWITCHES AND CONTROLS
power, wnen me Indicaior goes off. it means the
unit is in the normal operating stale.
(1) Power Button The indicator glows when abnormally high temperature is built
Depress this bullon lo turn on the power In the unit. Press up inside the unit. In such a case, the indloalor will remain
the button a second time lo release it and lo cut off the power. on until me temperature inside me unit drops to a nonnaf level.
(2) Power Indicator When the indicator goes off, it indicates the unit has returned
Glows when power is fumed on with the power button. oberaling slate.
(3) Protectton Indicator
The indicator normally lights for several seconds upon lurn.