HP 80000 User Manual page 60

Data Gen 1GHz:Channel Conflg
Press t,o view the Data Gen 1GHz menu. You can move
back to the Top Level page.
Press t,o print the screen, or a complete listing of all
configured Groups. Press ICancel if you want to stop the
print.
Use t,he these but,tons t.o cont.rol t,hc System State
(running or st,oppcd). Refer t,o "System State Controls" in
Chapter 2.
Press to define a new Group of channels:
1. Press t.he Name but t.on to give the Group a name.
2. Press the Type button to choose t.hr type of channels
3. Press [cont;nue_).
4. Assign channels t.o the Group by pressing t.he red
which are currently unassigned will have a red (NONE)
button. If necessary, scroll- the list by turning the
knob, or dragging t,he mouse wit.h the right-key
pressed, to see more 0utput.s.
Pressing a blue channel-name but.t.on will remove it
from t.he group again.
5. When
the Group, press &.
Note
module, for example Dat,a Format., Clock Mode and Preset
than one Group, the Groups will share these parameters.
you
If
all linked Groups.
have assigned all the channels
YOU
change a parameter for one, it will be changed for
1 GHz Data Generator Operating Reference
3
I
you
want to