Advertisement
46
Using Program Numbers)
bt
ae
2%
Designating the Desired Selection (
For this operation, the selections must be numbered by the
program numbers. The program numbers are written at the
same position as the start |D codes. For how to write the
program number, see page 31.
PGM Wo.
AMS
1
Designate the desired program number
b
with the numeric button(s)*.
Current program
Designated program
number
number
Press [> (play).
PGM NO.
Aus.
The designated selection is searched for at
t
high speed and playback starts from the
Displayed number is
Goes off.
beginning of that selection.
advanced to the designated
number one by one.
*When you press the numeric button(s) during play-pause mode, the deck enters the
pause mode at the beginning of the designated selection. Press iI or [> to resume
playback.
If an incorrect number is designated
Before pressing >>, press CLEAR.
The displayed program number will be cleared.
Then designate the correct program number.
Once [> is pressed, it is impossible to cancel the designated selection.
Skipping an Unwanted Portion (Using Skip ID) Ps
For this operation, the skip ID code(s) must be written on the tape.
Press SKIP PLAY.
The SKIP PLAY indicator lights.
During playback, the tape skips to the next start D position automatically
when a skip ID is detected, and the playback resumes.
SKIP
PLAY
PGM NO.
a
a
To stop skipping an unwanted portion
Press SKIP PLAY to turn off the SKIP PLAY indicator.
Advertisement
