Advertisement
Or: TXT-11(- 8 Mey-lel late
To prevent accidental erasure
When a recording is made, any previously recorded signal will
be erased automatically. To prevent accidental erasure, set
the safety tab to the position shown in the illustration.
Notes
» When you turn on the power, the #§ indicator blinks for a moment in
the display window. During this period, no buttons other than OPEN/
CLOSE and
and operative. Wait until blinking stops and Il goes
off.
« When inserting the cassette, do not push the cassette
compartment closed. Be sure to use the OPEN/CLOSE
button.
16
Recording is impossible (with the hole open).
Recording is possible (with the hole covered).
GB} Gt
1 Turn on the power.
2 Press OPEN/CLOSE.
3 Insert the cassette.
Insert the cassette
until it clicks.
Window side up
Tab facing fowards you
4 Press OPEN/CLOSE.
The lamp in the cassette compartment lights.
To remove the cassette
Press OPEN/CLOSE.
On the sampling frequency
When a cassette is inserted and a source program is played back, the
sampling frequency of the source program appears in the display
window.
Advertisement
