Sony DTC59ES Operating Instructions Manual page 7

MUSIC SCAN button
Press to listen to the beginning of each selection
successively.
FADER button
Press to fade in or fade out during recording or
playback.
MARGIN RESET button
Press to reset the margin of peak level.
CLEAR button
Press to cancel the program number which has been
mistakenly entered.
RECORDED button
Press to display the recording day of the
tape being played.
PRESENT button Press to display the current time.
Each time the RECORDED or PRESENT button is
pressed, day, month and year display, the day of the
week display or hour, minute and second display is
switched sequencially.
CLOCK SET button
Press to adjust the time of the clock built in this unit.
In this mode, the 0 button and the 9 button function as
the + and ~ buttons respectively.
[i
1
START ID buttons
AUTO: Press to turn on and off the AUTO indicator.
When the AUTO indicator is lit, the start ID will
automatically be written during recording. When the
AUTO indicator is not lit, press the START ID WRITE
button at the point where you want to write a start ID.
WRITE: Press to write the start ID at the desired point
during recording or playback.
ERASE: Press to erase a start ID. When a start ID and
a program number are written on the tape, both
codes are simultaneously erased by pressing this
button.
RENUMBER: Press to renumber all programs on the
tape. When only the start IDs are written, pressing
this button will insert the proper program numbers
beginning with "1". The tape will rewind and start
from the beginning to accomplish this function.
SKIP ID buttons
WRITE: Press at the beginning of the portion you may
wish to skip later. A skip ID will be written from the
point where you pressed this button.
ERASE: Press to erase the nearest skip ID which is
before the current position.
END ID buttons
WRITE: Press to write the ID signifying the end of
playback or recording.
ERASE: Press to erase the end ID.