Sony DTC59ES Operating Instructions Manual page 39

1 Designate the desired selection by pressing the
numeric button(s) during the stop mode.
The selection numbers can be specified from 1 to 99.
PGM NO. AMS
!
|
Lights
2 Press the ENTER button.
STEP
t L
1 a!
Indicates the playing order. | The RMS indicator lights
after programming the first
selection.
3 Repeat step 1 and 2.
A maximum of 60 selections can be programmed.
4 Press the » (play) button.
The programmed selections are played back in the
designated order.
To stop RMS play
Press the m button.
To check the programmed selections
Press the CHECK button on the remote commander. Each
time you press the CHECK button, the programmed
selections appear in the designated order.
To add a selection to the program
Once the RMS play starts, you cannot add a selection. To
add a selection, first stop the RMS play, and program new
selection(s) by following the procedure described on the
left column.
To delete the selection you programmed last
Press the CLEAR button.
However, when checking the programmed selection, the
CLEAR button cannot be used.
To cancel the entire program
In the stop mode: Press the m button once.
In the RMS play mode: Press the m button twice.
39