Sony DTC59ES Operating Instructions Manual page 38

A EcTaColUK Mm ad t- hy ey- (er MO] el-te-1ilears
To listen to the beginning of a selection for more than
the designated time
Press the » (piay) button while the selection you want to
listen to is played back.
While pressing the » button, the countdown at the MARGIN
display stops, and the playback of that selection continues.
To listen to an entire selection
Press the MUSIC SCAN button while the selection you want
to listen to is played back.
The music scan function is released, and the playback of
that selection continues.
When you press the MUSIC SCAN button during playback,
the tape is rewound to the beginning, and then the first part
of each selection (start ID position) is played back for the
time you designated sequentially.
Designating the Desired Selection
1 During the desired program number with the
numeric button(s)*.
PGM NO,
t ai
ro]
Current program Designated program
number number
38
2 Press » (play).
The designated selection is searched for at high
speed and playback starts from the beginning of that
selection.
PGM NO. AMS
= a
1
6
PGM NO.
Displayed number is qf
advanced to the
designated number one
by one.
L Goes off.
* When you press the numeric button(s) during play-pause
mode, the deck enters the pause mode at the beginning
of the designated selection. Press the PAUSE or »
button to resume playback.
Hf an incorrect number is designated
Before pressing the ® button, press the CLEAR button.
The displayed program number will be cleared.
Then designate the correct program number.
Once the » button is pressed, it is impossible to cancel the
designated selection.
Skip Play
For this operation, the skip ID code(s) must be written on
the tape.
Press the SKIP PLAY button.
The SKIP PLAY indicator lights.
During playback, the tape skips to the next start ID position
automatically when a skip ID is detected, and the playback
resumes.
SKIP PLAY
PGM NO.
SKIP ID
To stop skip play
Press the SKIP PLAY button to turn off the SKIP PLAY
indicator.
Auto Play: Restarting Playback after Rewinding
While pressing <4, press >.
The tape is rewound to the beginning, and playback starts
automatically.
If the above operation is done immediately after the
cassette is inserted, the auto play operation does not
function. Press » a few seconds after «4 is pressed.