Download Print this page

Interface - unicore HPL EVK5.0 Installation And Operation User Manual

Advertisement

2 Interface

2
1
The main interfaces and buttons of the EVK are shown in Figure 2-1. See Table 2-1 for
the detailed descriptions.
Table 2-1 Interface/Button Description
Interface Function
1
EVK power supply interface
2
EVK power supply switch
3
COM1
4
COM3
5
COM2
6
RJ45
7
SMA
8
28-pin board interface
9
42-pin board interface
Refer to the related user manuals of the boards/modules to be tested to confirm whether this
2
function is supported.
2
8
9
3
Figure 2-1 Appearance of EVK
Description
12 V power supply
Turn to the right to supply power
Connect to COM1 of the board to be tested
Connect to COM3 of the board to be tested
Connect to COM2 of the board to be tested
Ethernet interface
The four SMA interfaces are: FWR, EVENT1,
PPS1, SPEED
28-pin connector to connect Unicore
products
42-pin connector to connect Unicore
products
Interface
4
2
UC-00-E60 EN R1.1
7
6
5

Advertisement

loading
Need help?

Need help?

Do you have a question about the HPL EVK5.0 and is the answer not in the manual?