Pioneer PD-41 Service Manual page 8

2.3 REMOVE THE TRAY PANEL AND THE
3. PACKING
y cut the two sections
n remove the spacer.
Align the tray panel with the grooves located at both edges
ile motor sh i
Or Shatin
then press it down till it stops. (Fig. 3)
op of the motor base
section ®), and stick
about 9kg pressure).
Hold the tray panel and the tray as shown in Fig. 4 and <
3
slide them down till you hear a click sound while pressing
strongly with your thumbs. (Figs. 4 and 5)
Spacer
Tray panel
(pressure of
about 9kg)
$ Disc table
Fig. 3
Tray panel
Push strongly
NY
mK Y Ps
Slide down $ i
while pressing 4
IN