Installation Guide (Continued)
O Installation Procedures
First complete the electrical connections, and
then check them for correctness. (=> pages
25, 26)
B S0-"02m
Insert mounting collar @ into the dashboard, and
bend the mounting tabs out with a screwdriver.
Make sure that the lock lever (2) is flush with the
mounting collar @ (not projecting outward).
Lock lever (x)
a
Lock lever (x)
Mounting tabs
(5) Mounting bolt
Secure the rear of the unit.
After fixing mounting bolt (5) and power connector
6), fix the rear of the unit to the car body by either
method (a) or (b) shown below.
insert trim plate ©.
(&) After installation, reconnect the negative © bat-
tery terminal.
KAN
O
y
(a) Using the rear support strap ©
Fire wall of car
(4) Tapping screw
/
3mm¢
(2) Hex. nut
Rear support
strap
(5) Mounting bolt
(O Mounting collar
22
| CO-DEXSO1/DE401/DEX301U
|
(b) Using the rubber cushion (option)
|
|
Rear support bracket
Rubber cushion (option)
(provided on the car)
NS
ne
(5) Mounting bolt
D Mounting collar