Pairing 3D Active Glasses; Replacing The Battery - Samsung UE46F8500A Manual

3D Active Glasses
Features
Samsung's SSG-5100GB 3D glasses enable you to view
3D images on your 3D TV. The Samsung 3D glasses
communicate with Samsung 3D TVs via the 2.4GHz RF
band.
The Samsung 3D glasses are only compatible with
✎
Samsung D, E, and F series 3D TV's that were
released in 2011, 2012, and 2013. These 3D glasses
cannot be connected to other Bluetooth devices.
Parts
LED Indicator & Power Button
Battery Cover
For details on how to attach the glasses' temples and
how to pair the glasses with the TV, refer to the separate
3D glasses manual.

Replacing the Battery

If the red LED blinks every two seconds continually,
replace the battery with a new one.
Insert the "+" side of the battery into the side marked
✎
with "+" in the battery compartment.
To check the remaining battery capacity, refer to the
✎
pairing section in this manual.
Pull the battery Open the battery
cover downward cover
Push the battery
Replace the battery
cover downward

Pairing 3D Active Glasses

✎
✎
• Turning the glasses on
• Turning the glasses off
Liquid crystal shutter
• Performing the pairing process
Remove the
battery
Close the battery
cover
English - 15
What is Pairing? Pairing is the process of connecting
3D glasses and a 3D TV so that the two devices can
exchange data.
Ensure your Samsung TV and 3D glasses are no
farther than 19.5 in (50 cm) apart from each other
while pairing is in progress.
Press the power button
briefly. The green LED is
turned on for 3 seconds.
(Make sure that 3D is
activated on the TV before
using the 3D glasses.)
Press the power button briefly. The red LED is turned
on for 3 seconds.
Turn the TV on and let it power up completely. Press
and hold the Power button on the glasses. The green
and the red LEDs blink alternately for 2 seconds.