Adding/Removing Z-Wave Devices - American Standard Gold 824 User Manual

Adding/Removing Z-Wave Devices

To Add or Remove Z-Wave Devices select: Home
Screen > Menu > Smart Home
Your Gold 824 is designed to integrate seamlessly
with your American Standard Home account.
page 26
Adding Z-Wave Devices
1. From the HOME Screen, select MENU, then
select SMART HOME.
2. Select ADD DEVICE and follow the device
manufacturer's instructions for setting the
Z-Wave device into learn mode. You will have
four minutes to set the device into learn mode
after selecting the ADD DEVICE button.
Removing Z-Wave Devices
1. From the HOME Screen, select MENU, then
select SMART HOME.
2. Select REMOVE DEVICE and follow the
manufacturer's instructions for setting the
Z-Wave device into learn mode. You will have
four minutes to set the device into learn mode
after selecting the REMOVE DEVICE button.
Advanced Z-Wave Settings
Select ADVANCED for advanced Z-Wave functions
including unregistering your bridge from American
Standard Home or factory resetting your bridge.
See the Advanced Z-Wave Settings section for more
information.
Update Network
Select UPDATE NETWORK to update the network
of your bridge. Updating the network can generate
a lot of Z-Wave tra c over the network and can take
up to 15 minutes to complete.
824 User Guide