Indicator
Name
Deceleration
Paddle Selector
Indicator
Transmission
System Indicator
Seat Belt Reminder
Indicator
On/Blinking
●
Comes on when the paddle selector is
pulled.
Blinks when deceleration does not occur
●
while pulling the paddle selector.
Comes on with M when SPORT mode is
●
selected or pulling the paddle selector.
Blinks if the transmission system has a
●
problem.
Blinks and the beeper sounds for a few
●
seconds if you are not wearing a seat belt
when you set the power mode to ON, then
the indicator comes on.
●
If the front passenger is not wearing a seat
belt, the indicator comes on a few seconds
later.
Comes on for a while when the rear seat
●
belt is unfastened while the power mode in
ON.
Blinks while driving if you and/or any
●
passenger has not fastened a seat belt. The
beeper sounds and the indicator blinks at
regular intervals.
Explanation
2 Deceleration Paddle Selector P. 382
Have your vehicle checked by a dealer immediately.
●
●
Do not drive displays on the driver
information interface - Immediately stop in a safe
place and contact a dealer.
The beeper stops and the indicator goes off when
●
you and the passengers fasten their seat belts.
Stays on after you and/or the passengers have
●
fastened the seat belt(s) - A detection error may
have occurred in the sensor. Have your vehicle
checked by a dealer.
2 Seat Belt Reminder P. 48
uuIndicatorsu
97
Continued