Honda ACCORD Hybrid 2024 Owner's Manual page 136

uuGauges and DisplaysuDriver Information Interface (Right Side Area)
■
Change gauge design
You can change the gauge design.
■
Warnings
You can check if there are any active warning messages.
134
1. Press the right selector wheel when you
select the Gauge display settings on the
driver information interface.
2. Roll the right selector wheel to scroll to
select Gauge design, then press the right
selector wheel.
3. Roll the right selector wheel to scroll to
select your desired settings, then press the
right selector wheel.
1Change gauge design
When using the Round minimal or Bar minimal
gauge design, a simplified display is used when ACC
with Low Speed Follow is in operation.
1Warnings
If there are multiple warnings, you can roll the right
selector wheel to see other warnings.