Honda ACCORD Hybrid 2024 Owner's Manual page 188

uuOperating the Switches Around the Steering WheeluDriving Position Memory System
■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory Buttons
186
* Not available on all models
1. Set the power mode to ON. Adjust the
driver's seat to the desired position.
2. Press the SET button.
u The SET button indicator light will come
on.
3. Press memory button ( 1 or
seconds of pressing the SET button.
You will hear the beeper, and the SET
u
button indicator light goes off.
1. Put the transmission into ( P .
2. Apply the parking brake.
3. Press a memory button ( 1 or (
The seat will automatically move to the
memorized position.
*
1Driving Position Memory System
The transmitter settings may not be switched when
you change owner accounts.
If this happens, change to a different account and
then try switching to the desired account again.
For details, please refer to the following page.
2 Switching Users P. 294
( 2 within five
NOTICE
When the door is opened, the driver's seat moves to
the seat position of the account that last used the
transmitter.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
( 2 ).
seconds.
•
You readjust the seat position before the double-
beep.
•
You set the power mode to any position except
ON.
1Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button or memory button
•
Adjust the seat position.
•
Put the transmission into a position other than
*
( 1 or ( 2 .
( P .